|
Post by mmfrankford on Sept 6, 2011 16:12:43 GMT
Hello again. I am going to sculpt a 1:4 or 1:5 scale Styracosaurus trophy mount. (One of my favorites and I was inspired by the busts I have seen on here. ) I'm looking for the size dimensions of the skull. For that matter, does anyone have accurate drawings/images of the skull from different views. Thanks for the help.
|
|
weaver
Full Member
Icon by the great Djinni!
Posts: 156
|
Post by weaver on Sept 6, 2011 17:05:31 GMT
Ooooo! Such a great idea! Unfornatly, I don't have any resources on Strya-skulls but good luck! I can't wait to see how it looks. <3
|
|
|
Post by mmfrankford on Sept 6, 2011 20:24:17 GMT
Thanks. I look forward to getting started on it. ;D
|
|
|
Post by arioch on Sept 7, 2011 1:23:19 GMT
|
|
|
Post by paleoferroequine on Sept 7, 2011 2:26:33 GMT
|
|
|
Post by Blade-of-the-Moon on Sept 7, 2011 4:21:03 GMT
Sounds SWEET ! ;D
|
|
|
Post by Seijun on Sept 7, 2011 6:28:17 GMT
Also note that in those references, the frill is very flat. I believe the general consensus is that in real life, the frill would have met the skull at about a 45 degree angle (?)
|
|
|
Post by mmfrankford on Sept 7, 2011 12:52:04 GMT
Thanks paleoferroequine, those are what I was looking for. Yeah I thought the skull had the more angled position. It looks better that way anyway. I was thinking this for angle, see attachment. Attachments:
|
|
|
Post by paleoferroequine on Sept 7, 2011 16:26:04 GMT
Thanks paleoferroequine, those are what I was looking for. Yeah I thought the skull had the more angled position. It looks better that way anyway. You're welcome. Centosaurines such as Styracosaurus and Pachyrhinosaurus have a subhorizontal frill, fairly flat with a slight upturn at the back rim. Basal ones such as Albertaceratops and Diabloceratops have a subvertical frill closer to 45 degrees. I think the Papo centrosaurines are pretty close to accurate.
|
|
|
Post by mmfrankford on Sept 7, 2011 16:34:00 GMT
Thanks, I'll take that into consideration. Wow, the Papo figures have something correct..did I hear that right?? ;D
|
|
|
Post by ingenia on Sept 8, 2011 15:51:52 GMT
I can`t wait to see your work! So you will work with epoxy? Stracosaurus is such a cool dinosaur, but he has a complicate head to sculpt because it is always hard to imagine a three-dimensional ceratopian skull.My brother sculpted his Diabloceratops bust and told me it was much more complicated than the other sculptures he did. I hope you will post some pictures!
|
|
|
Post by mmfrankford on Sept 8, 2011 16:02:27 GMT
You guys definitely are an inspiration. I'm picking up the high density Corning foam today from Home Depot. I probably will use the two part epoxy putty. Where did you guys get your supply of epoxy?
|
|
|
Post by ingenia on Sept 8, 2011 18:07:43 GMT
I am buying epoxy from a german online shop, but if you look for the apoxie brand from aves which I use, you should visit their website avesstudio.com. I am sure it is easier to get these materials in the U.S. than here in europe. Thanks for saying my work inspires you, is there a chance you will make some in progress pictures?
|
|
|
Post by mmfrankford on Sept 15, 2011 18:31:15 GMT
Here is the sketch I made taken from some skull references. Detail is limited, I'm just seeing if I got the general silhouette/eye,mouth, etc. placement correct. Thanks for any feedback. Also I am sculpting this in a 1:6 scale. I like this size (12" from beak to longest spike) for sculpting. What I hope to do is others in 1:6 scale or 1:8 scale(smaller dinos) after this. ;D Attachments:
|
|
|
Post by Seijun on Sept 15, 2011 20:56:18 GMT
|
|
|
Post by mmfrankford on Sept 16, 2011 0:20:33 GMT
Thanks. Now I see what needs to be altered. Great reading, I'll be watching that Blog.
|
|