|
|
Post by Seijun on May 21, 2011 22:49:14 GMT
I've been told that the pachyrhinosaurus guns are the same as the guns on the brontosaurus. The bronto has at least two gun sizes that I know of, according to ebay: a "large" and a "medium". Does anyone know which is correct for the pachy? The diameter of the empty gun bases on my pachy are roughly 1-1/8" across.
Second question: Is the armor for the series 3 Quetzalcoatlus the same as the armor for the regular brown version? I occasionally see a gold Quetzalcoatlus chair that I can't find any info on.
|
|
|
|
Post by emperorkrulos on May 22, 2011 9:16:03 GMT
|
|
|
|
Post by Seijun on May 22, 2011 9:48:02 GMT
Thank for the info.
I just discovered that the golden chair I have been seeing is one that was customized.
|
|
|
|
Post by Seijun on May 24, 2011 0:29:58 GMT
Ok, found out that the guns for the bronto are not identical to the pachy's. Maybe one of the sizes would fit (the bronto has a few different gun sizes) but the decorations on top of the guns is definitely different.
On another note, I was able to remove the armor from my pachy without cracking or breaking the rubber band! And no part of the band had fused to the dinosaur. I am happy!
|
|
|
|
Post by Ajax on May 24, 2011 1:12:16 GMT
Ok, found out that the guns for the bronto are not identical to the pachy's. Maybe one of the sizes would fit (the bronto has a few different gun sizes) but the decorations on top of the guns is definitely different. On another note, I was able to remove the armor from my pachy without cracking or breaking the rubber band! And no part of the band had fused to the dinosaur. I am happy! Is this because you just want the dinosaur and not the armor? cos i would be happy to take the armor of your hands,  |
|
|
|
Post by Seijun on May 24, 2011 4:05:46 GMT
No, I want the armor. But if the rubber band is left in place too long it can fuze to the dinosaur.
|
|
|
|
Post by emperorkrulos on May 24, 2011 20:01:31 GMT
Ok, found out that the guns for the bronto are not identical to the pachy's. Maybe one of the sizes would fit (the bronto has a few different gun sizes) but the decorations on top of the guns is definitely different. Too bad the guns aren't identical. Judging from the pictures I saw, the guns looked pretty much identical. Mind enlightening us to the exact difference? On another note, I was able to remove the armor from my pachy without cracking or breaking the rubber band! And no part of the band had fused to the dinosaur. I am happy! Congratulations! Is the rubber band brittle, or is it still usable? Hope the rest of your project goes just as well. |
|
|
|
Post by Seijun on May 24, 2011 20:19:40 GMT
The pachy guns have ridges running over the top:  Bronto guns are plain on top except for some raised dots. The different gun sizes had a different number of dots each.   The rubber band I removed still has a little stretch to it. It didn't feel dry and didn't show any cracking. Funny how some bands dry up and crumble to pieces while others still look brand new. |
|
|
|
Post by emperorkrulos on May 28, 2011 20:50:52 GMT
Hm. I see. Thanks for the clear up. I'm Probably not the only one to make that mistake I figure the decay of the rubber bands is connected the amount of light it was exposed to. |
|
